Arcadia LumenIZE T5 to LED 1.2 M Link Cable

Arcadia LumenIZE T5 to LED 1.2 M Link Cable – combine UVB and LED lighting

The Arcadia LumenIZE T5 to LED 1.2 M Link Cable is specially designed to connect two different lighting systems from the Arcadia LumenIZE series.

This connection cable allows you to connect a LumenIZE Pro T5 UVB Kit to a LumenIZE JungleDawn LED Bar. This allows you to combine high-quality UVB lighting with powerful supplemental daylight lighting without needing a separate power connection for each fixture.

This makes the cable particularly suitable for naturally designed reptile terrariums, tropical vivariums, and bioactive enclosures where both appropriate UVB radiation and sufficient visible light are important.

Thanks to their 120-centimeter length, you can position the two light fixtures flexibly and route the wiring neatly along or behind the terrarium.

Combine the Arcadia Pro T5 UVB with the JungleDawn LED

A well-lit terrarium often requires more than just a UVB lamp.

UVB lighting is important for many reptiles in terms of vitamin D3 production and normal calcium metabolism. Powerful daylight lighting also creates a bright, natural appearance and can support the growth of suitable terrarium plants.

The Arcadia LumenIZE Pro T5 UVB Kit is designed to provide reptiles with the proper UV radiation.

The Arcadia LumenIZE JungleDawn LED Bar produces intense, visible light that is particularly well-suited for planted terrariums.

With the LumenIZE T5 to LED Link Cable, you can easily connect the two systems.

This creates a complete lighting setup in which UVB and supplemental LED lighting complement each other.

Two fixtures via a single power supply

A key advantage of the Arcadia LumenIZE T5 to LED 1.2 M Link Cable is the ability to connect multiple compatible lighting systems to a single suitable power supply.

Connect the first LumenIZE fixture to the power supply. Then use the T5 to LED Link Cable to connect the second fixture.

This means you don’t have to run a separate power cord from each light to an outlet.

This reduces the number of cables around the terrarium and makes the setup more organized.

Arcadia supports the linking of up to ten compatible LumenIZE units within the system’s technical limits.

It is important not to exceed the maximum allowable electrical load.

Individual control via the LumenIZE app

Although the linked lights share the same power source, they can be controlled individually.

Each LumenIZE fixture has its own electronics and internal memory for the preset lighting program.

Using the free Arcadia LumenIZE app, you can control the UVB lamp and the LED lighting independently of each other.

For example, you can set the JungleDawn LED Bar to turn on before the UVB lighting.

You can also keep the LED lights on longer or adjust the brightness.

This gives you more options for adjusting the light cycle in the terrarium to match the natural habitat of the reptile species you are keeping.

The connection cable provides only the electrical connection. Bluetooth control is handled by the connected LumenIZE fixtures.

Natural sunrise and sunset

With the Arcadia LumenIZE system, you can program a natural daylight cycle.

In nature, the intensity of sunlight gradually increases throughout the morning and then decreases again as the evening approaches.

The LumenIZE app makes it possible to simulate this light gradient.

By combining a LumenIZE Pro T5 UVB Kit and a JungleDawn LED Bar, you can coordinate the different light sources.

For example, the LED lighting can provide a gradual transition into the daytime, after which the UVB lamp is turned on at the desired time.

At the end of the day, the UVB lighting can be dimmed earlier, while the LED bar remains on for a while longer.

This creates a flexible lighting system with individually programmable light sources.

Ideal for tropical and bioactive terrariums

In a tropical terrarium, both lighting and plants play an important role.

Many terrarium plants need sufficient visible light to grow properly. At the same time, certain reptiles need adequate UVB exposure.

By combining a LumenIZE JungleDawn LED Bar with a LumenIZE Pro T5 UVB Kit, you can combine both functions into a single lighting setup.

This is particularly useful, for example, for terrariums housing geckos, chameleons, anoles, and other reptiles that benefit from a combination of daylight and UVB.

A combined lighting system also offers advantages in densely planted vivariums with bromeliads, ferns, climbing plants, and mosses.

The T5 to LED Link Cable allows you to connect both fixtures to each other in a neat and organized manner.

Fewer cables and a neater terrarium setup

When multiple lights are connected individually, the wiring around a terrarium can quickly become a tangled mess.

Large terrariums or reptile enclosures, in particular, often require multiple power cords and outlets.

The Arcadia LumenIZE T5 to LED Link Cable helps reduce the number of individual power connections.

Because the two fixtures are connected directly to each other, the installation is more organized.

The cable can be neatly routed along the ceiling of the terrarium or behind the enclosure.

This isn’t just practical during the initial installation; it also makes future maintenance easier.

Cable length of 120 centimeters

The Arcadia LumenIZE T5 to LED 1.2 M Link Cable is 1.2 meters long.

This length provides enough flexibility to mount a T5 UVB fixture and a JungleDawn LED bar in different positions.

This allows you to match the lighting to the terrarium’s decor.

In larger tanks, for example, you can place the UVB lamp above a suitable UV zone, while the LED bar illuminates a larger portion of the plants.

The connecting cable makes it possible to install the fixtures at some distance from one another, as long as the connections remain within the cable’s reach.

Avoid sharp bends, tensile stress, and damage to the cable.

IP65 water-resistant connection cable

The Arcadia LumenIZE T5 to LED 1.2 M Link Cable has an IP65 rating.

This classification indicates that the properly connected joint is protected against dust and water jets under the corresponding test conditions.

This makes the cable suitable for various terrarium setups, including humid tropical enclosures.

The water-resistant design is particularly useful for terrariums that are regularly misted or that have high humidity.

The IP65 rating does not mean that the cable can be used underwater.

Always ensure that connectors are properly connected and prevent electrical connections from being submerged in water for extended periods of time.

Compatible with various LumenIZE Pro T5 UVB Kits

The Arcadia LumenIZE T5 to LED 1.2 M Link Cable is designed for compatible Arcadia LumenIZE lighting systems.

Among other things, you can use the cable to connect a compatible LumenIZE Pro T5 UVB Kit from the ShadeDweller, Forest, Desert, or Dragon series to a LumenIZE JungleDawn LED Bar.

This makes the cable suitable for various types of reptile terrariums.

Whether you’re setting up a tropical habitat with lots of plants or a terrarium for a sun-loving reptile species, this cable offers a practical way to combine UVB and LED lighting.

Please note: The Arcadia LumenIZE T5 to LED 1.2 M Link Cable is not compatible with conventional Arcadia Pro T5 UVB Kits or JungleDawn LED Bars without LumenIZE technology.

Difference between the three Arcadia LumenIZE Link Cables

Arcadia has developed three different connection cables for the LumenIZE system.

Each cable has specific connectors for the corresponding fixtures.

The T5-to-LED adapter is therefore specifically designed to connect a UVB fixture to an LED bar.

Would you like to connect two T5 UVB fixtures? If so, choose the T5 to T5 Link Cable.

To connect two JungleDawn LED Bars, use the LED-to-LED Link Cable.

Technical Specifications

Colour

Package Contents

The package contains one Arcadia LumenIZE T5 to LED Link Cable, 1.2 meters long.

A UVB fixture, JungleDawn LED Bar, and main power cable are not included.

Instructions for Use: Arcadia LumenIZE T5 to LED 1.2 M Link Cable

Turn off the power completely before connecting the link cable.

Make sure you have a compatible Arcadia LumenIZE Pro T5 UVB Kit and a LumenIZE JungleDawn LED Bar.

Connect the T5 connector to the designated connection point on the UVB fixture.

Next, connect the LED connector to the port on the JungleDawn LED Bar.

Check to make sure both connectors are properly and securely connected.

Route the cable neatly along the terrarium and avoid sharp kinks or tension on the connections.

If you want to connect multiple LumenIZE fixtures, check in advance to make sure the total electrical load remains within the permitted limits.

Once connected, you can configure both fixtures individually using the Arcadia LumenIZE app.

Use this cable only with compatible LumenIZE systems and not with conventional T5 or LED fixtures.