Arcadia Infrared Heat Spot for Terrariums

Arcadia Infrared Heat Spot for Terrariums

The Arcadia Infrared Heat Spot for Terrariums is designed to heat terrariums where reptiles, amphibians, and other cold-blooded animals are kept. This infrared heat lamp primarily emits thermal radiation and only a limited amount of visible, reddish light. This allows the lamp to be used to heat a specific spot in the terrarium while also contributing to the ambient temperature.

Unlike a traditional basking lamp that emits bright daylight, the Arcadia Infrared Heat Spot is designed with heat emission as its primary function. The lamp provides targeted infrared heat that is absorbed by the animals and surfaces in the terrarium.

The Arcadia Infrared Heat Spot is available in four wattages: 50, 75, 100, and 150 watts. This allows you to adjust the wattage based on the size of the terrarium, the desired temperature, and the heating needs of the species you are keeping.

Targeted Infrared Heat for Reptiles

Reptiles are ectothermic animals. This means they depend on external heat sources to regulate their body temperature.

The Arcadia Infrared Heat Spot for Terrariums emits infrared radiation that is absorbed by animals and surfaces within the lamp’s range. This creates a heated zone where reptiles can warm themselves.

A suitable temperature is important for normal bodily functions, including activity, movement, and digestion.

The targeted heat output makes it possible to warm, for example, a rock, a branch, or another suitable surface.

Always make sure the animal can reach cooler areas of the terrarium as well. This creates a temperature gradient that allows the reptile to choose a suitable spot on its own.

Limited visible red light

A key feature of the Arcadia Infrared Heat Spot for Terrariums is its limited emission of visible light. The lamp produces a reddish glow instead of the bright light of a traditional basking lamp.

This can be useful when you want to provide additional heat without shining a strong light on the terrarium.

However, it is important to note that red light is not invisible to all reptiles. Even nocturnal animals can be sensitive to certain wavelengths of visible light.

If a terrarium needs to remain completely dark at night, a heat source that emits no visible light—such as a ceramic heat lamp or a suitable Deep Heat Projector—is generally a better choice.

The Arcadia Infrared Heat Spot may therefore be particularly useful as a supplemental heat source when a limited amount of reddish light is acceptable.

Increases the temperature in the basking area

The Arcadia Infrared Basking Spot for Terrariums is designed to emit targeted heat. This allows you to heat a specific area in the terrarium.

The infrared radiation is absorbed by, among other things, stones, branches, and other surfaces located beneath the lamp. These materials can then release heat into their surroundings.

In this way, the lamp contributes both to the temperature of the heated area and to the overall temperature in the enclosure.

The final heat output depends on several factors, including wattage, mounting distance, ventilation, and ambient temperature.

It is therefore necessary to take a temperature reading at the animal’s actual location.

Available in 50, 75, 100, and 150 watts

The Arcadia Infrared Heat Spot for Terrariums is available in four wattages. This allows you to choose a model that matches the heat requirements and dimensions of your terrarium.

A higher wattage does not automatically mean that a bulb is more suitable. The correct wattage depends on the desired temperature, the distance from the basking spot, and the conditions inside the terrarium.

In a compact enclosure, for example, a more powerful lamp may produce too much heat, while a larger terrarium may actually require more heating power.

Therefore, always use an appropriate thermostat and check the actual temperatures.

Infrared Heat Spot or Solar Basking Spotlight?

Arcadia offers various types of heat lamps, each with its own specific application.

The Solar Basking Spotlight produces visible, warm daylight and is designed to create a concentrated basking spot. This lamp is particularly suitable for reptiles that warm themselves during the day under a distinct source of light and heat.

The Infrared Heat Spot, on the other hand, is designed to produce a lot of heat with relatively little visible light. This makes it a good choice as supplemental heating when a bright basking lamp is not desired.

For heating without visible light, Arcadia also offers ceramic heat lamps and Deep Heat Projectors.

The most suitable lamp depends on the species, the desired day-night cycle, and the terrarium’s layout.

Use with a suitable thermostat

A thermostat is an important part of safe terrarium heating.

The Arcadia Infrared Heat Spot for Terrariums can be connected to a suitable thermostatic temperature control. This prevents the temperature in the heated area from rising unnecessarily high.

The choice of thermostat type must be compatible with the lamp’s specifications and the connected power.

When using a dimmable thermostat, the heat output can be adjusted by controlling the lamp’s wattage, provided the selected model is designed for this purpose.

In addition, check the temperature regularly using a separate thermometer or infrared thermometer.

A thermostat does not eliminate the need to check for the correct mounting distance and safe installation.

Suitable for various terrarium environments

The Arcadia Infrared Heat Spot for Terrariums can be used in various terrariums where additional heating is needed.

This can be useful, for example, for reptiles that need a warm resting spot or in enclosures where the ambient temperature needs to be raised during the day.

Even in larger terrariums, an additional infrared lamp can be used to heat a specific area.

Extra caution is required for tropical terrariums and amphibian enclosures. Many species are sensitive to overheating and dehydration. Therefore, always adjust the wattage and placement to suit the specific animals and the desired humidity level.

The Arcadia Infrared Heat Spot is not a substitute for a complete lighting system. For species that require UVB, separate, suitable UVB lighting must be provided.

Product Specifications

Package contents

The package contains one Arcadia Infrared Heat Spot for Terrarium in the selected wattage.

A lamp holder, thermostat, protective cage, and additional lighting are not included.

Instructions for use

Mount the Arcadia Infrared Heat Spot for Terrarium in a heat-resistant fixture with a ceramic E27 socket. Check if the lamp holder is suitable for the selected wattage.

Place the lamp above a suitable heat source and keep it at a safe distance from animals, plants, branches, and other materials. Make sure that the terrarium’s inhabitants cannot come into direct contact with the hot lamp. When installing the lamp inside the enclosure, use a suitable protective cage.

Connect the heat lamp to a suitable thermostat and check the temperature with a separate thermometer. Adjust the desired temperature to meet the needs of the species being kept.

Always ensure there is a temperature gradient so that animals can move away from the heat source.

If the terrarium needs to be completely dark at night, it is best to use a suitable heat source that does not emit visible light.

Combine the Arcadia Infrared Heat Spot with separate daylight and UVB lighting as needed.