Repto Heat Mat with Thermostat

The Repto Heat Mat With Thermostat combines a compact terrarium heating mat with a digital temperature controller. The sensor is integrated into the mat, allowing it to measure the temperature of the heat source directly. Use the digital display to set the desired temperature and operating time. This allows you to create a controlled heating zone for reptiles, amphibians, or invertebrates without a separate thermostat.

Repto Heat Mat With Thermostat for controlled terrarium heating

Reptiles cannot regulate their body temperature in the same way as mammals. They use different temperature zones within their enclosure to warm up or cool down. The Repto heating mat helps create a localized warm zone without emitting visible light.

The mat is especially useful for species that benefit from moderate background or contact heat. Examples include corn snakes, royal pythons, African house snakes, leopard geckos, and various invertebrates. For tropical species, the heating mat can be used when the ambient temperature drops too low, provided that the selected temperature is appropriate for the species.

For diurnal desert animals such as bearded dragons and uromastyx, a heating mat is generally not suitable as the sole heat source. These animals usually require a more intense basking area with heat from above and appropriate lighting. The heating mat can only be used as a supplemental heat source if it is appropriate within the overall setup.

Digital controller with temperature and timer settings

The included controller features a digital display, an indicator light, and buttons for increasing, decreasing, and confirming settings. The factory setting is 35 °C, but it must be adjusted before use to suit your animal and the chosen setup.

You can switch between Celsius and Fahrenheit. The set temperature is automatically saved in memory. After a power outage, the controller restarts with the previously saved settings.

In addition to temperature control, the controller features a timer. You can choose between continuous heating or a heating duration of 2, 4, 8, or 12 hours. Once the cycle is complete, the heater turns off. As long as the power remains connected, the timer repeats the same heating duration every 24 hours. This allows you to set up a simple daily heating cycle.

Four sizes for different terrarium setups

The Repto Heat Mat With Thermostat is available in four models. The dimensions and wattage together form a single selection criterion, making it easy to choose the right model.

Choose a Repto Heat Mat With Thermostat that heats only part of the enclosure. There should always be a cooler area available so that the animal can move between different temperatures on its own. Therefore, the largest or most powerful model is not necessarily the best choice.

Multi-layer PVC heating mat with built-in sensor

The heating mat consists of PVC, insulating layers, and an internal heating wire. The integrated sensor measures the mat’s temperature. This is a key difference from a thermostat with a separate probe, which can be placed in a different location within the terrarium.

The displayed temperature is therefore not automatically the same as the temperature on the substrate or in the air. The type of material, glass thickness, ventilation, room temperature, and distance from the mat all affect how much heat actually reaches the enclosure. Always use a separate digital thermometer to check the temperature at the animals’ level. An infrared thermometer is also useful for measuring surface temperatures.

Key Features of the Heated Mat with Thermostat

Installation on the exterior of the enclosure

Clean the glass before attaching the mat. Apply the double-sided adhesive layer step by step and press out any air bubbles to ensure a secure bond. According to the manual, the glass must be thicker than 3 millimeters.

When placing the Repto Heat Mat With Thermostat under the enclosure, the terrarium must rest on four support points to ensure there is at least 10 millimeters of clearance beneath the base. This helps limit heat buildup. Do not place the mat inside the terrarium, and avoid contact with water. The heating mat must not be folded, punctured, cut, or covered with insulating material.

Instructions for use

Assemble the mat exclusively according to the supplied manual and adjust the temperature to the needs of your animal species. Test the complete setup before placing the animal in the enclosure. Check both the warm and cool zones with a separate thermometer and take measurements at different times of the day.

Keep the cRepto Heat Mat With Thermostat dry and out of reach of animals.